Comprehensive Testing.
Confident Construction.
From construction material testing and soil investigation to non-destructive and field testing, SITL supports engineering professionals with testing services that help assess material quality and project requirements.
Comprehensive Testing. Confident Construction.
Reliable testing solutions for construction materials, geotechnical investigations and on-site assessment — supporting quality, performance and informed engineering decisions.
01
Concrete & Mix Design
Concrete mix design, fresh concrete and hardened concrete testing for construction quality assessment.
- 1.Concrete Mix Design — M7.5 to M100 grades
- 2.Concrete Permeability Test — water penetration depth assessment
- 3.Rapid Chloride Permeability Test (RCPT)
- Cube, beam and extracted core testing
- Slump and workability assessment
02
Steel & Metal Testing
Mechanical and requested chemical testing of reinforcement bars and structural steel, subject to confirmed laboratory capability.
- Tensile strength and yield stress
- Percentage elongation and mass per metre
- Cold bend and rebend tests
- Chemical Composition Testing using Spectrophotometer
03
Coarse & Fine Aggregates
Assessment of aggregate grading, physical properties and specified chemical or durability characteristics.
- Sieve analysis and gradation
- Crushing, impact and abrasion values
- Specific gravity and water absorption
- Alkali–Aggregate Reactivity
- Organic Impurities and Deleterious Materials
- Aggregate Soundness and Petrographic Examination
04
Soil & Geotechnical Investigation
Soil characterization and field investigation to support foundation and earthwork decisions.
- Borehole drilling and SPT
- CBR and compaction tests
- Atterberg limits and shear tests
05
Bitumen, Highway & Job Mix Testing
Testing of bituminous materials and road construction mixes, subject to confirmed service scope.
- Penetration, ductility and softening point
- Marshall stability and flow
- Binder extraction and job mix formula
- Bituminous mixes: BM, DBM, BC, OGC
- Carpet and Micro Surfacing
- Granular/base mixes: GSB, WMM, WBM, Filter Media
06
NDT & Field Testing
On-site assessment of concrete condition and selected structural, ground or pavement properties.
- Rebound Hammer and UPV
- Half-Cell Potential and Carbonation Depth
- Electrical Resistivity Test (ERT)
- Plate Load, Bridge Load and BBD tests
- Rebar Scanning
07
Precast, Bricks & Masonry
Testing masonry units and precast materials for strength and relevant quality parameters.
- Clay and fly ash bricks
- AAC and concrete blocks
- Strength and water absorption
08
Water Testing
Water sample testing for construction-related applications and other applicable quality requirements.
- Construction water assessment
- Applicable quality parameters
- Testing based on confirmed laboratory scope
09
Cement Testing
Evaluation of cement properties for applicable construction material quality requirements.
- Physical property assessment
- Relevant cement quality parameters
- Testing based on confirmed service scope
10
Bituminous & Surfacing Job Mixes
Testing and evaluation of bituminous mixtures and surfacing materials for road construction and pavement works.
- Bituminous Mix (BM) and Dense Bituminous Macadam (DBM)
- Bituminous Concrete (BC) and Open-Graded Carpet (OGC)
- Carpet and Micro Surfacing mixes
- Marshall stability, flow and job mix assessment
11
Granular & Base Layers Job Mix
Assessment of granular materials and base-layer mixes used in road construction and pavement foundations.
- Granular Sub-Base (GSB)
- Wet Mix Macadam (WMM)
- Water Bound Macadam (WBM)
- Filter Media and grading assessment
Testing scope, methods and availability depend on the requested test and project requirements. Please contact SITL to confirm the specific service.
Concrete Durability Testing
Specialized tests for assessing concrete permeability and resistance to chloride-ion penetration. Availability should be confirmed with the laboratory.
Concrete Permeability Test
Testing to assess water penetration depth in concrete specimens under the applicable test method.
- Concrete water penetration assessment
- Specimen and method requirements to be confirmed
Rapid Chloride Permeability Test (RCPT)
Concrete durability test used to evaluate electrical charge passed as an indicator related to chloride-ion penetrability.
- Chloride-ion penetrability assessment
- Test method and specimen requirements to be confirmed
Site NDT & Field Testing
Non-destructive and field testing options for concrete assessment, reinforcement location, pavement evaluation and selected structural investigations.
01
Rebound Hammer Test
Surface hardness assessment to help evaluate concrete uniformity and estimate surface strength.
Enquire on WhatsApp →
02
Ultrasonic Pulse Velocity (UPV)
Ultrasonic testing to help assess concrete uniformity and investigate possible internal defects.
Enquire on WhatsApp →
03
Half-Cell Potential Test
Electrochemical potential measurements to assess the likelihood of corrosion activity in reinforced concrete.
Enquire on WhatsApp →
04
Carbonation Depth Test
Assessment of carbonation penetration to support concrete durability investigations.
Enquire on WhatsApp →
05
Electrical Resistivity Test (ERT)
Electrical resistivity investigation to help assess subsurface conditions, depending on the method used.
Enquire on WhatsApp →
06
Plate Load Test
Field assessment of soil or foundation support response under applied loading, using the agreed test procedure.
Enquire on WhatsApp →
07
Bridge Load Test
Planned loading and response measurements to assess bridge behaviour under an approved test procedure.
Enquire on WhatsApp →
08
Benkelman Beam Deflection (BBD) Test
Measurement of pavement deflection under a specified loading arrangement to support pavement evaluation.
Enquire on WhatsApp →
09
Rebar Scanning
Non-destructive investigation to help locate reinforcement and assess concrete cover, subject to equipment and site conditions.
Enquire on WhatsApp →All testing services, equipment, methods, reporting and availability must be confirmed with SITL before booking. No accreditation or certification claim is implied by this service list.
Our Testing Services
Explore our material testing services for construction and infrastructure projects. Select a service to discuss your requirements directly with our team on WhatsApp.
Concrete Testing
Concrete strength, workability and other specified tests to help assess concrete properties.
Cement Testing
Assessment of cement properties through applicable laboratory testing procedures.
Steel Testing
Relevant mechanical and physical testing of reinforcement steel and specified steel materials.
Soil Testing
Geotechnical and soil tests to help evaluate soil characteristics and ground conditions.
Aggregate Testing
Testing of gradation, specific gravity, absorption and other relevant aggregate properties.
Bitumen Testing
Assessment of bituminous materials and specified binder properties for road projects.
Building Material Testing
Testing of specified bricks, blocks, pavers and other construction materials.
Water Testing
Water sample testing according to the requested parameters and available testing scope.
Testing scope and availability depend on the requested test, applicable method and project requirements. Contact our team to confirm the specific service.
Chemical Testing Services by Material
Material-specific chemical testing to assess composition, quality and suitability for construction applications.
Cement Chemical Analysis
Oxide composition including lime, silica, alumina and iron oxide, plus LOI, insoluble residue, magnesia and sulphur trioxide.
Aggregate Chemical Testing
Alkali–aggregate reactivity, chloride and sulphate content, and organic impurity testing.
Water Quality Testing
Construction and concrete mixing suitability, measuring pH, TDS, chlorides, sulphates and suspended matter.
Construction Materials Analysis
Admixture Chemical Testing
Active chemical composition, chloride content, solids, density and pH for plasticizers, superplasticizers and accelerators.
Steel & Rebar Analysis
Spectroscopic elemental analysis of carbon, manganese, sulphur, phosphorus and silicon, plus corrosion or coating assessments.
Soil Chemical Testing
pH, organic matter, soluble salts, sulphates and chlorides, with relevant CBR or compaction testing.
Tiles & Ceramics Testing
Chemical resistance, water absorption, acid and alkali resistance, and composition testing.
Chemical Testing Services by Material
Material-specific chemical analysis to support the assessment of composition, durability and suitability for construction applications.
Cement Chemical Analysis
Oxide composition: lime, silica, alumina and iron oxide; LOI, insoluble residue, magnesia and sulphur trioxide.
Aggregate Chemical Testing
Alkali–aggregate reactivity, chloride and sulphate content, and organic impurity testing.
Water Quality Testing
Construction water suitability: pH, TDS, chlorides, sulphates and suspended matter.
Laboratory Material Analysis
Admixture Chemical Testing
Active composition, chloride, solids, density and pH for plasticizers, superplasticizers and accelerators.
Steel & Rebar Analysis
Spectroscopic analysis of carbon, manganese, sulphur, phosphorus and silicon, plus applicable corrosion or coating assessments.
Soil Chemical Testing
pH, organic matter, soluble salts, sulphates and chlorides, alongside relevant CBR or compaction tests.
Tiles & Ceramics Testing
Chemical resistance, water absorption, acid and alkali resistance, and applicable composition testing.
Geotechnical & Soil Investigation
Understanding ground conditions is an essential step in foundation design and infrastructure planning. Soil investigation helps engineers assess site characteristics and make informed project decisions.
Reliable Soil Assessment for Better Planning
Geotechnical investigations help engineers understand soil characteristics and evaluate ground conditions for foundation and infrastructure planning. The scope of investigation depends on site conditions and project requirements.
Investigation Services May Include
- Borehole Drilling & Standard Penetration Test (SPT)
- Soil Sampling & Borehole Logging
- California Bearing Ratio (CBR) Testing
- Atterberg Limits & Soil Classification
- Maximum Dry Density (MDD) & Optimum Moisture Content (OMC)
- Field Density & Applicable Shear Strength Tests
Enquire About Soil Investigation
The availability of individual investigation services, site requirements and testing scope should be confirmed with our team before scheduling.
Industries We Support
Supporting diverse construction and infrastructure projects with material testing services aligned with project specifications and agreed testing requirements.
Testing Support for Every Stage of Construction
From building developments to civil engineering and infrastructure works, material testing helps project teams evaluate specified material properties and make informed construction decisions.
Residential & Commercial Construction
Material testing support for residential buildings, commercial developments and related construction works.
Civil Engineering & Infrastructure
Testing support for civil engineering works and infrastructure projects according to specified needs.
Roads & Highway Projects
Relevant soil, aggregate and bitumen testing for applicable roadwork and pavement requirements.
Builders & Real Estate Developers
Testing coordination to support material evaluation across building development projects.
Civil Contractors & Consultants
Material testing support aligned with project specifications, technical requirements and agreed scope.
Industrial & Institutional Construction
Testing support for applicable industrial facilities, institutional buildings and associated civil works.
Why Choose SITL?
We focus on understanding project requirements, coordinating testing activities and communicating clearly about the agreed testing scope and reporting expectations.
Broad Testing Services
Access a range of material testing services covering key construction materials and selected testing needs.
Laboratory & On-Site Testing
Laboratory testing and selected on-site testing options can be discussed according to the project requirements.
Clear Communication
Understand the proposed testing scope, sample needs and relevant requirements before proceeding.
Agreed Testing Scope
Testing and reporting are approached in line with the agreed scope and applicable testing methods.
Professional Coordination
Project enquiries are handled with a focus on requirements, coordination and next steps.
Client-Focused Approach
We aim to understand each project's specific needs and guide enquiries toward suitable testing options.
Have a Testing Requirement?
Share your material type, project location and testing needs so our team can discuss the appropriate next steps.
Need Testing Support for Your Project?
Discuss your material or site testing requirements with Sai Infrastructure Testing Laboratory.